1. You should remove all jewelry before showering or cleaning as soap can cause a film to form, making your jewelry appear dull and dingy. By preventing the formation of this film you immediately reduce the occasions of servicing.

2. To clean your jewelry at home, there are many available commercial cleaners that can be purchased at jewelry stores. If your would rather make and mix your own cleaner, drop us a email and we will give you instructions. The trick to solution cleaning is to soak the jewelry for as long as possible. This will loosen any built up material that is trapped in and around the piece. Always remember to read the instructions on the commercial cleaners before you attempt cleaning.

3. When self cleaning jewelry always use this handy visual checklist first: check to see if there are any loose or damaged gemstones; cracked or broken metal; bent or worn prongs/tips; discolored or pitting metal. Sounds like lots to go through but jewelers have the same mental checklist when cleaning and inspecting.

4. Having a hard time removing grease, grime, paint or any other substance? Try using plain rubbing alcohol, soak then clean normally should do the trick.

5. Never, never, clean your jewelry in bleach!!! This solution will literally destroy your jewelry. Bleach will react to the metal, causing it to become very brittle. If you must emergency clean, use soap and water.

6. Polish silver or gold with a jewelry polishing cloth for best results. You can use a selvyt polishing cloth or an old diaper, but the professional cloths are the best. Use of tissue or paper towels can cause scratches because of fibers in these products.

7. An old toothbrush is probably one of the oldest cleaning tricks in the book. DO NOT use toothpaste as it can scratch the mountings. Make sure that you use an old, soft bristle brush, because the hard bristle can loosen gemstones from their settings. Lightly brush at hard to reach areas with the brush while frequently applying cleaning solution. Never use the brush to remove caked on dirt or grime because sometimes the dirt is holding the gemstone into place, especially if the setting is worn or weak. Old toothbrushes are also great for cleaning watchbands, but remember to stay away from the watch case/movement, as it will develop rust - a killer of quartz or mechanical movements.

8. Be careful of cleaning or polishing hollow or tubular jewelry. Their thickness is very thin and unstable for polishing. Be very careful when rubbing cleaning or polishing solutions into them because the slightest pressure can dent or collapse the metal.

9. Many gemstones are enhanced with other substances and they have to be handled with care. It's best to read all cleaning solution labels before cleaning, also use care when directly cleaning gemstones. Cleaning solutions will lose power over time and must be repurchased. If unsure about witch solutions to use, contact us or your local jeweler and they will be able to walk you through it.

10. When wearing jewelry, apply common sense liberally: don’t sleep with your jewelry on, especially chains. Water will make rings slip off, so leave rings at home when you’re enjoying water sports. Remove hand jewelry before gardening, housecleaning, or any work where your jewelry may come in contact with hard or rough surfaces. You’d be surprised how much damage can be done by a steel filing cabinet or a car door.

11. When using a polishing cloth try to stay away the gemstones unless they are the major colors of the flag - red (ruby) white (diamond) blue (sapphire). Some gemstones can have their facets/angles polished off or rubbed out by hard polishing. One good example is tanzanite, any polishing on the gemstone can rub out or dull its brilliance.

12. Always use warm not HOT water. Cleaning agents can be absorbed and react to very hot water causing a jewelry to discolor. Sterling silver is especially sensitive to hot water and can discolor in a heartbeat. Fires or smoke damage can cause jewelry to discolor. Many customers come into our store, distraught over the discoloration of their jewelry. Not to worry though - a careful polishing ( a buffing machine ) or a special jewelry tarnish remover can bring it back to life. Call us or come in and we will help or direct you the best way possible.

13. Never clean any jewelry that is badly damaged, abrasive, cracked or broken. As with any other item broken our badly scratched items can exacerbate or worsen the problem. Also, if you see that your items are damaged while you are wearing them it only makes sense to remove and have them looked at. You know the old saying, " an ounce of prevention is worth a pound of cure".

14. Just like anything else, it is a very good idea to have all items for cleaning be checked and inspected for any possible problems or concerns. A jewelry inspection allows your jeweler an opportunity to professionally clean and inspect wear areas that can lead to breakage, abrasion or god forbid a lost gemstone! Treat your jewelry like your health and it will take care of you - emotionally and financially. You should have your rings professionally inspected and cleaned at least two times a year. Most people are busy and forget. To jog your memory, remember to do it twice a year when you have to change your clocks.

Return to the Education Page Page

Return to the Jewelry Home Page

Find a custom jeweler in Springfield, or internet jeweler.